Rockwell Automation 1394 Upgrading Your Axis Module User Manual
Page 6
Advertising
Upgrading your Axis Module
6
Publication 1394–6.2 – March 1997
Bottom of Axis Module
7
7. Plug the green wire labeled PE2 into the terminal on the
grounding wire. Make sure the flat side of the connecter faces
away from the bottom of the axis module.
8. Go to Re-assembling the Axis Module Cover.
Re-assembling the Axis Module Cover
To re-assemble the axis module cover:
1. Place the cover on the the axis module.
Advertising