Rockwell Automation 1394 Upgrading Your Axis Module - Manual (Page 4)

Upgrading your Axis Module 4
Publication 1394–6.2 – March 1997
7. Once all of the screws have been removed, take off the cover of
the module.
8. Go to Installing the Ground Wire.
Installing the Ground Wire
2
1
3
1. Remove these two M4 x 10 mm pan head screws.
2. Cut and remove a 12 mm (0.5 in) diameter piece of the Mylar
sheet around each screw hole.
3. Install one of the M4 x 12 mm flat head screws included with the
kit.