Rockwell Automation 1395 DC Drive, 800-1250 Hp, FRN 5.XX-9.30 - Manual (Page 195)

Chapter 7
Reference Materials
7-10
Alphabetical Parameter Reference Listing
PARAMETER NAME PARAMETER NO. PAGE REFERENCE
ABS Overspeed 724 5-63
AC Line Voltage 116 5-22
Accel Time 651 5-45
Arm Bridge Type 733 5-66
Arm Current Firing Angle 114 5-22
Arm Current PI Output 113 5-22
Arm Current Reference 111 5-21
Arm Current Reference 112 5-22
Arm Resistance 614 5-35
Arm Voltage Fdbk 105 5-20
At Speed 1 – 5 704 – 708 5-58 – 5-60
Auto Tune I Lim 698 5-56
Auto Tune Speed 699 5-57
Base Motor Speed 606 5-33
CEMF Feedback 120 5-23
CEMF Reference 160 5-31
CEMF Reg Preload 687 5-54
Contactor Type 622 5-37
Cur Damp Factor 743 5-68
Cur Desired BW 741 5-68
Cur Max BW 742 5-68
Decel Time 652 5-46
Desired Contour 653 5-46
DI/DT Limit 668 5-49
Drive Fault 101 5-18
Droop Filter 658 5-47
Droop Percent 657 5-46
Encoder Velocity 122 5-24
Encoder PPR 609 5-33
End Taper Speed 666 5-48
Ext Overtemp Dly 725 5-64
Fault Report 630 5-41
Fault Select 623 5-37
Fdbk Device Type, 621 5-36
Field Economy Delay 675 5-50
Field Economy Ref 674 5-50
Field Fault Threshold 729 5-65
Final Vel Ref 103 5-20
Fld Cur Ref 117 5-22
Fld Cur Fdbk 118 5-23
Fld Failure Delay 730 5-65
Fld Flux Ref 676 5-52