Rockwell Automation 1606-XLSRED40 Power Supply Reference Manual - Manual (Page 8)

All parameters are specified at 24V, 40A output current, 26°C ambient and after a 5 minutes run-in time, unless noted otherwise.
8 Rockwell Automation Publication 1606-RM010A-EN-P — February 2014
Bulletin 1606 Switched Mode Power Supplies
7. Functional Diagram
Fig. 7-1 Functional diagram
+
-
+
-
+
-
Input 1
control
control
Input 2
Chassis
Ground
Output
8. Front Side and User Elements
Fig. 8-1 Front side
A Output
Terminals (screw terminals)
B Chassis Ground Terminals
To be connected on the top side of the housing with a ring-type terminal
(ring cable lug) which is suitable for a M4 screw.
Connection of the chassis is optional and not required since the unit fulfils
the requirements according to protection class III.
C Input
Terminals for Input 1 (screw terminals)
D Input
Terminals for Input 2 (screw terminals)
Chassis
Ground
A
B