Rockwell Automation 1512A MV Controllers, 400A One-High Cabinet, Standard and Arc-Resistant Enclosure - Manual (Page 23)

Rockwell Automation Publication 1512A-UM100F-EN-P - May 2013 15
Chapter
3
Installation – Arc-Resistant (ArcShield)
This installation section contains information related only to the Rockwell
Automation arc resistant enclosures, referred to now as “ArcShield”.
Door Opening Procedure Opening the Low Voltage Doors
Low voltage doors are identified as LV in Figure 17 .
1. To access the low voltage compartments for ArcShield cabinets, turn the
release handle counter-clockwise.
2. The door is now released and will swing open.
3. Reverse the procedure to secure the low voltage doors.
Figure 17 - Access to Low Voltage Compartments
IMPORTANT For information on the installation site preparation, see Publication
MV-QS050_-EN-P .
ATTENTION: Use suitable personal protective equipment (PPE) per local codes
or regulations. Failure to do so may result in severe burns, injury or death.
.
.
Low Voltage
Door
Medium
Voltage Door
Chimney