Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 119)

Rockwell Automation Publication 1408-UM001D-EN-P - September 2013 119
SCADA Applications Appendix B
5. In the right hand pane, under the Data Source tab, browse to your power
monitor.
You may use a serial or Ethernet network driver.
6. Make sure that the topic is highlighted in the left pane, and that the power
monitor is also highlighted in the right pane, then click Apply.
7. Click the Data Collection tab.
TIP When using a DH485 driver, change the connection type to
local addressing mode in the Advanced Communication tab.
This is especially important when several topics use the DH485
driver.