Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 124)

124 Rockwell Automation Publication 1408-UM001D-EN-P - September 2013
Appendix B SCADA Applications
Do not enter an RPI less than 50 mS.
6. Click OK, then Save and download the offline project into the controller.
The data from the user configured table is read into the controller tag [Module
Name]:I.Data without any further logic programming, at the selected RPI rate.
A power monitor connected instance may be owned by only one controller. An
error results if you attempt to establish a connection with more than one
controller. You may use explicit messaging to read the F9 table from any number
of controllers.