Powermonitor 1000 – Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit User Manual
Page 21
Rockwell Automation Publication 1408-UM001D-EN-P - September 2013
21
PowerMonitor 1000 Overview Chapter 1
6. With Advanced Setup displayed, press <enter>, then press <down> until
Set Date Year appears.
7. Press <enter> to change the value of the year.
The power monitor is now in Edit mode, indicated by the presence of the
highlight cursor. Change the year value and press <enter> to save it or
<escape> to discard changes.
See
8. Select the next item in the configuration menu by pressing <down>.
Set the month in the same way.
Continue setting the remaining parameters in the same way.
•
Navigate to the top menu display
•
<enter> then <down> then <enter> to access the password screen
•
Enter the correct password to access Program mode
•
Navigate to the desired menu using <enter>, <up> and <down>
•
<enter> selects a parameter for editing
•
<up> or <down> increments or decrements the value of the highlighted
digit
•
<up> and <down> together move the highlight cursor
•
<enter> saves your changes; <escape> discards them
•
<escape> several times to the top menu to access Display mode
PowerMonitor 1000
RS-485
STATUS
RX TX Mod Net
Set Date
Year
2008
PowerMonitor 1000
RS-485
STATUS
RX TX Mod Net
Set Date
Year
2005