Rockwell Automation 1747-PCINT API Software for 1746 I/O - Manual (Page 2)

Important User
Information Because of the variety of uses for the products described in this
publication, those responsible for the application and use of this control
equipment must satisfy themselves that all necessary steps have been
taken to assure that each application and use meets all performance and
safety requirements, including any applicable laws, regulations, codes
and standards.
The illustrations, charts, sample programs and layout examples shown
in this guide are intended solely for example. Since there are many
variables and requirements associated with any particular installation,
Allen-Bradley does not assume responsibility or liability (to include
intellectual property liability) for actual use based upon the examples
shown in this publication.
Allen-Bradley publication SGI-1.1, Safety Guidelines For The
Application, Installation and Maintenance of Solid State Control
(available from your local Allen-Bradley office) describes some
important differences between solid-state equipment and
electromechanical devices which should be taken into consideration
when applying products such as those described in this publication.
Reproduction of the contents of this copyrighted publication, in whole
or in part, without written permission of Allen-Bradley Company, Inc.
is prohibited.
Throughout this manual we use notes to make you aware of safety
considerations:
Attention helps you to:
•
identify a hazard
•
avoid the hazard
•
recognize the consequences
Important: Identifies information that is critical for successful
application and understanding of the product.
AMIBIOS is a trademark of American Megatrends, Inc.
SystemSoft and CardSoft are trademarks of SystemSoft Corporation.
Microsoft and MS-DOS are trademarks of Microsoft.
!
ATTENTION: Identifies information about practices
or circumstances that can lead to personal injury or
death, property damage or economic loss.