Rockwell Automation 1784-KTCX15 INSTL INSTR CONTROLNET COMM. User Manual

Page 6

Advertising
background image

6

ControlNet Communication Interface Card

Publication 1784-5.33 – September 1997

Selecting the Base Memory Address Location

The host computer and the card exchange data via a dual-port interface. The
dual-port interface is 16 Kbytes long and it begins at the specified base memory
address location.

The card comes set to memory address D000:0000. You may find that this
selected memory address has been allocated to other interface cards or expansion
memory cards you have installed in your computer system. If this occurs,
change the switch settings to an available memory address.

To select a new base memory address:

1. Pick an available address from the ROM I/O adapters area of the host

computer’s memory. Be sure to choose a block that is 16 Kbytes long.

2. Use Worksheet A to select a new memory address for the card.

3. Use Worksheet B to determine the proper switch settings.

Follow this guide to properly set your switches.

up (1)

down (0)

1 2

1 2 3 4

MSB

LSB

Front View

up (1)

down (0)

Side View

Front View

S2

S1

4. Fill in Worksheet C after you’ve determined your switch settings.

5. Follow the instructions that begin on page 11.

ControlNet Communication Interface Card

31

Publication 1784-5.33 – September 1997

Specifications

The operating parameters describe the environment within the KTCX15 slot.
Refer to the documentation for your computer for environmental requirements.
The card should not exceed those specifications.

General Specifications

Characteristic

Value

Power
Requirements

5V dc, 640mA Maximum

Conductor

Category 2

Environmental Specifications

Operating

Nonoperating

Slot Temperature

0 to 50

°

C (32 to 122

°

F)

– 40 to 85

°

C (– 40 to 185

°

F)

Humidity

5 to 95% without condensation

5 to 95% without condensation

Vibration

10 to 150 Hz, constant .012 in
displacement

10 to 150 Hz, constant 2.0G
acceleration

not applicable

Shock

30G peak/11 ms

50G peak/11 ms

Agency Certification

(when product or packaging is marked)

Class 1, Division 2
Groups A, B, C, D

П

П

П

П

ПП

ПП

П

П

marked for all applicable directives

Advertising