Rockwell Automation 1769-OB32T Compact 32-point Solid-state 24V dc Source Output Module - Manual (Page 14)

14 Compact 32-point Solid-state 24V dc Source Output Module
Publication 1769-IN080A-EN-P - August 2006
Ground the 1769-OB32T Module
This product is intended to be mounted to a well-grounded mounting surface such
as a metal panel. Additional grounding connections from the module’s mounting
tabs or DIN rail (if used) are not required unless the mounting surface cannot be
grounded.
Refer to Industrial Automation Wiring and Grounding Guidelines, Allen-Bradley
publication 1770-4.1, for additional information.
Label for the 1492 Interface Module
Several different stick-on label sets are provided on a single card with 1492
interface modules. Each label set is identified with an I/O module catalog number
and words upper and lower to identify to which terminal strip the label should be
affixed.
The Terminal Block Labels table identifies the 1769-OB32T 32-point labels and their
location on the interface module. Peel off the appropriate label and apply it to the
interface module.
Terminal Block Labels
Bottom Terminal Block Top Terminal Block
+V1
+V1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CM1
CM1
+V2
+V2
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
CM2
CM2