Rockwell Automation 1792D-KPLT ArmorBlock MaXum Cable Base - Manual (Page 8)

8 ArmorBlock MaXum Robot I/O Cable Base and Kempf Box Plate
Publication 1792D-IN054B-EN-P - April 2003
ArmorBlock MaXum I/O modules are described in the following
publications:
•
1792D series of ArmorBlock MaXum Installation Instructions
•
1792-TD001 ArmorBlock Technical Data
The DeviceNet Network uses advanced network technology,
producer/consumer communication, to increase network
functionality and throughput. Visit our web site at
http://www.ab.com/networks for producer/consumer technology
information and updates.
Attach the Cables
1. Attach your network cable and power cable (if used) to the
connectors.
2. Cover the power connector with a cap if it is not used.