Rockwell Automation 1792D-KPLT ArmorBlock MaXum Cable Base - Manual (Page 9)

ArmorBlock MaXum Robot I/O Cable Base and Kempf Box Plate 9
Publication 1792D-IN054B-EN-P - April 2003
3. Attach your I/O connector cables.
!
WARNING
If you connect or disconnect the DeviceNet cable
with power applied to this module or any device
on the network, an electrical arc can occur. This
could cause an explosion in hazardous location
installations.
Be sure that power is removed or the area is
nonhazardous before proceeding.
31463-m
Male
Female
Network
In
Network
Out