Rockwell Automation 1792-IB2XOB2E/B INSTL.INST ARMOR BLOCK 2 INPUT User Manual
Page 8
Advertising
ArmorBlock 2 Input/2 Output Module
8
Publication 1792-5.5 – October 1996
Connect the Wiring to the ArmorBlock Module
The block module uses quick disconnect, screw-on style connectors
for:
•
I/O input wiring
•
I/O output wiring
•
power wiring for I/O outputs
•
the DeviceNet connector
0
1
0
1
Output power
mini connector
DeviceNet
mini connector
2 micro connectors for input wiring
2 micro connectors for output wiring
4 micro plugs – these
seal unused ports
Micro plugs are included with your module. Use these plugs to cover
and seal unused ports.
Pinout diagrams for these connectors are shown below.
!
ATTENTION: All connectors must be securely
tightened to properly seal the connections against leaks
and maintain NEMA 4X and 6P requirements.
Advertising