Rockwell Automation 1790P-T8BV8B Profibus DP Digital Base Terminal Block Compact Block LDX I/O I.I. - Manual (Page 16)

16
Publication 1790-IN009B-EN-P - April 2003
AC/DC Relay Output Base Block Specifications
General Specifications
PROFIBUS Power Supply voltage - 24V dc nominal
Voltage range - 19.2-28.8V dc
Power dissipation - 1.2W maximum @ 28.8V dc
Field Power Supply voltage - 24V dc nominal
Voltage range - 10-28.8V dc
Power dissipation - 3.22W @ 28.8V dc
Isolation I/O to logic: photocoupler isolation
Isolation voltage: 1250V ac rms
PROFIBUS to logic: non-isolated
PROFIBUS power: non-isolated
Wiring Terminal block (M3.0)
- screw torque: 7 inch-pounds
maximum (use copper or copper-clad
aluminum conductors
1790P-TOW6
Relay type Form A, normally open
Single pole, single throw
Output voltage range (load dependent) 5-28V dc @ 2.0A resistive
48V dc @ 0.8A resistive
125V ac @ 2.0A resistive
250V ac @ 2.0A resistive
Minimum load 100 µA, 100mV dc per point
Maximum on-state voltage drop 0.5V @ 2.0A, resistive load, 24V dc
Initial Contact Resistance 30m ohm
Expected contact life 300K cycles resistive
100K cycles inductive
Maximum off-state leakage 1.5mA maximum
Output delay time 10ms maximum on to off
10ms maximum off to on
Indicators 6 green status
Common type 1 point/1COM