Rockwell Automation 1790P-T8BV8B Profibus DP Digital Base Terminal Block Compact Block LDX I/O I.I. - Manual (Page 7)

7
Publication 1790-IN009B-EN-P - April 2003
5. Replace the base block on the panel and place a screw
through each of the two mounting holes. Tighten the
screws until the base block is firmly in place.
DIN Rail Mounting
1. Hook the top slot of the base block over the DIN Rail.
2. Pull down on the locking lever while pressing the base
block against the rail.
3. When the base block is flush against the rail, push up
on the locking lever to secure the base block to the rail.
42.5 mm
1.7 in
109.5 mm
4.3 in
Expansion
Cover
Locking Lever
f