Rockwell Automation 1757-PROCESSLINX ProcessLinx OPC Server to Server Software User Manual - Manual (Page 15)

1 Publication 1757-UM002B-EN-P - January 2003
Chapter
2
Getting Started
This section provides the required information to setup and configure both
the ProcessLinx software as well as the communications interface to the
ProcessLogix OPC Server and the external OPC Server.
ProcessLinx Version The version of the ProcessLinx can be found by selecting the Help menu in
the main window. The version label below displays Version 2 and Build # is 68,
built on January 10, 2003.
Figure 2.1 ProcessLinx Version Label
Configure Mode In configure mode, you can modify the ProcessLinx Options and Settings
from the main window. ProcessLinx does not communicate with OPC Servers
in configure mode.
To change to configure mode from the menu tab, select Mode
⇒
Configure.
Changing from runtime to configure mode will disestablish all OPC tag items
and Groups and stop all communication with the OPC Servers. You can also
click in runtime or press the keys <Shift+F5> to change back to
configure mode.