Rockwell Automation 1757-PROCESSLINX ProcessLinx OPC Server to Server Software User Manual - Manual (Page 28)

Publication 1757-UM002B-EN-P - January 2003
3-8 ProcessLinx TagMap Configuration
• If just one of those active tags is GOOD or QUESTIONABLE quality
then server is not failed on the basis of 'Bad Quality' since data can be
obtained for at least one of the items. This also means that the server
cannot be 'failed' on the basis of Bad Quality if the user set all groups in
that server to Inactive (i.e. No active groups) since there will be no
active tags to check quality with.
Creating a Group
The Group Properties dialog box in Figure 3.2 displays.
Figure 3.2 Group Properties
The Group Properties dialog box allows specification of the OPC
Group parameters. These parameters affect all TagMaps and OPC
Items contained in the Group. Define a descriptive name for the new
Group. You can also enter a Group description.
To: Select:
create a Group
1. Select the Pipe
2. Select
Edit
⇒ Add New Group... from the main
menu or use <CtrlG>.
The “Add Group” function is also available when
you right mouse click on the Pipe, via a pop-up
menu.