Rockwell Automation 1792D-OVT16E ArmorBlock MaXum 16 Sinking Output Module, Series B - Manual (Page 4)

4 ArmorBlock MaXum 16 Sinking Output Module Series B
Publication 1792D-IN041B-EN-P - September 2000
Refer to the illustration of the node address below.
The module is equipped with AutoBaud detect. AutoBaud lets the
module read the settings already in use on your DeviceNet network
and automatically adjusts to follow those settings.
Mount the Module to the Cable Base
This module mounts to the following cable bases:
• 1792D-CBFM for KwikLink™ flat media installation
• 1792D-CB12 for 12mm drop cable installation
• 1792D-CB18P for round media DeviceNet
• or other optional cable base assembly
To install the module:
IMPORTANT
The cable base should already be installed. See
publications 1792D-IN009B-EN-P (CBFM & CB12)
or 1792D-IN036B-EN-P (CB18, CB18P, CB18PT) for
more information on how to install the cable base.
IMPORTANT
Proper alignment of the screws is necessary to
complete the connections between the module
contacts and cable contacts.
NODE ADDRESS
(00-63 PGM)
LSD MSD
0 1
2
3
4 5
8
9
7
6
0 1
2
3
4 5
8
9
7
6
Bottom View of Module
Example: Node Address is set at 62 (see small black dots). 30703