Rockwell Automation 1769-IF4 Compact (Series B or Later) Analog Input Module - Manual (Page 4)

4 Compact™ 1769-IF4 (Series B or Later) Analog Input Module
Publication 1769-IN048A-EN-P
Remove Power
System Assembly
The module can be attached to the controller or an adjacent I/O module
before or after mounting. For mounting instructions, see “Panel Mounting”
on page 6, or “DIN Rail Mounting” on page 7. To work with a system that
is already mounted, see “Replacing a Single Module within a System” on
page 8.
The following procedure shows you how to assemble the Compact I/O
system.
!
ATTENTION
Remove power before removing or inserting this module.
When you remove or insert a module with power
applied, an electrical arc may occur. An electrical arc can
cause personal injury or property damage by:
• sending an erroneous signal to your system’s field
devices, causing unintended machine motion
• causing an explosion in a hazardous environment
Electrical arcing causes excessive wear to contacts on
both the module and its mating connector. Worn contacts
may create electrical resistance.
6
5
4
3
1
1
2