Rockwell Automation 1772-LPx DATA PLC-2 FAMILY PROG CONTRL - Manual (Page 11)

Step
4
Publication 1772Ć10.1 - March 1996
Install and Connect Power
Supply
Install the power supply module in the leftĆmost slot of the processor chassis.
a
Plug the other end of the I/O power cable that you used in step 1b on page 1Ć1
into the power socket on the I/O chassis.
b
Make ac or dc connections to the the power supply terminal strip.
c
10216ĆI
2A/250 VAC
120V
SLOWĆBLOW
I/O Power
Sockets
AC FUSE
I/O RACK POWER
L1 L2
JUMPERS
220V
JUMPER
If you want to use 220/240V AC,
you must reposition these jumpers.
1772ĆP1 power supply
10A
+ 24V DC -
SLOWĆBLOW
I/O Power
Sockets
AC FUSE
I/O RACK POWER
L1 L2
10217-I
1772ĆP4 power supply
Plug the power supply cable that extends from the rear of the power supply module into the socket
on the processor chassis backplane.
d
plug
power
cable in
here
0.5
AMP
Fuse
0.25 AMP
Fuse
Power
Supply
Cable
Socket