Rockwell Automation 1772-LPx DATA PLC-2 FAMILY PROG CONTRL User Manual
Page 14
5–3
Install and Connect Remote I/O Scanner and Adapter
Publication 1772Ć10.1 - March 1996
d
Install the module.
front of chassis
lockingĆbar pins
Remove power from the I/O chassis.
Pull these pins to release the locking bar and swing it up.
ATTENTION: Do not make connections to
terminals 4 through 10. These terminals are
connected internally (1 to 4, 2 to 5 and 3 to 6) and
cannot be used for any other purpose.
c
Wire the field wiring arm.
1 Line 1
2 Shield
3 Line 2
4 No connection
5 No connection
6 No connection
7 No connection
8 No connection
9 No connection
10 No connection
11 In
12 Ret
Reset
User supplied
I/O rack restart
pushbutton
AllenĆBradley Cable (cat. no.
1770ĆCD)
Blue
Shield
Clear
1
2
3
4
5
6
7
8
9
10
11
12
Cable
17343
Remote I/O Cable
Insert the module, then snap the locking bar
over the top of the module to secure it.
Swing the field wiring arm up into place and
press until it latches.
Restore power to the system.