Mount the module to the cable base – Rockwell Automation 1792D-12BVT4D ArmorBlock MaXum 12 Input/4 Output Module Series B User Manual
Page 4
![background image](/manuals/579330/4/background.png)
4 ArmorBlock MaXum 12 Input/ 4 Output Module Series B
Publication 1792D-IN004B-EN-P - August 2000
Refer to the illustration of the node address below.
The module is equipped with AutoBaud detect. AutoBaud lets the
module read the settings already in use on your DeviceNet network
and automatically adjusts to follow those settings.
Mount the Module to the Cable Base
This module mounts to the following cable bases:
• 1792D-CBFM for KwikLink™ flat media installation
• 1792D-CB12 for 12mm drop cable installation
• 1792D-CB18P for round media DeviceNet and output power
• or other optional cable base assembly
IMPORTANT
The cable base should already be installed. See
publication 1792D-IN036B-EN-P (CB18P) or
1792D-IN009B-EN-P (CBFM, CB12) to install the
cable base.
41462