Rockwell Automation 1792D-12BVT4D ArmorBlock MaXum 12 Input/4 Output Module Series B - Manual (Page 7)

ArmorBlock MaXum 12 Input/ 4 Output Module Series B 7
Publication 1792D-IN004B-EN-P - August 2000
I/O connectors for this module are shown below.
Output Power and DeviceNet Cables
Output power and DeviceNet cables are described in the installation
publications for the cable base assembly of your choice. Refer to the
following publications:
• 1792D-IN009B-EN-P ArmorBlock MaXum Cable Base
Installation Guide
• DN-6.7.2 DeviceNet Cable Planning and Installation Manual
Communicate With Your ArmorBlock MaXum I/O
Module
This ArmorBlock module’s I/O is exchanged with the master through
a poll, change-of-state, or cyclic connection.
The module consumes and produces I/O data as follows:
Type of I/O Connections Consumes Produces
Cyclic 1 Byte 4 Bytes
Polled 1 Byte 4 Bytes
Change-of-State 1 Byte 4 Bytes
I-2
I-3
I-4
I-5
I-9
I-8
I-0
I-1
I-11
I-10
I-7
I-6
Logic Status Net/Mod Status
O-0
O-1
O-3
O-2
Auxiliary Power
42339
Output 0
Output 1
Input 0
Input 1
Input 2
Input 3
Input 4
Input 5
Output 3
Output 2
Input 11
Input 10
Input 9
Input 8
Input 7
Input 6
Connector A
Connector B
Connector C
Connector F
Connector E
Connector D