Rockwell Automation 1746-BAS-T SLC 500 Basic Basic-T Modules - Manual (Page 58)

Publication 1746-UM004B-EN-P - December 2005
4-10 Programming Overview
5. Enter a line of the BASIC program at the system prompt [ > ].
A BASIC program line always begins with a line number and
must contain at least one character, but no more than 68
characters.
6. Press
[RETURN]
to end the program line.
Run a BASIC Program
After entering your BASIC program, you are ready to run it. To run a
BASIC program, type
RUN
at the system prompt [ > ].
READY
>10 REM FIRST PROGRAM
>20 PRINT “HELLO WORLD”
READY
>RUN
HELLO WORLD