Rockwell Automation 1756-EWEB ControlLogix EtherNet/IP Web Server Module Installation Instructions - Manual

Publication 1756-IN588A-EN-P - February 2004
Installation Instructions
EtherNet/IP Web Server Module
Catalog Number 1756-EWEB
Use this manual as a guide to install the EtherNet/IP
®
Web Server Module.
Note that this document covers hardware installation and some configuration
procedures to get you started. Refer to the EtherNet/IP Web Server Module User
Manual, publication number ENET-UM527, for more detailed configuration
information.
The following table lists the contents of this document and where to find
specific information.
Topic See Page
Important User Information 2
Environment and Enclosure 2
Preventing Electrostatic Discharge 4
European Hazardous Location Approval 4
North American Hazardous Location Approval 5
Identify Module Components 8
Prepare the Chassis for Module Installation 9
Determine Module Slot Location 10
Install the Module 11
Using the Web Server Module 19
Troubleshooting the Module 25
Where to Find More Information on Configuring the Module 26
Specifications 27
Rockwell Automation Support 30