Rockwell Automation 1756-EWEB ControlLogix EtherNet/IP Web Server Module Installation Instructions - Manual (Page 24)

24 EtherNet/IP Web Server Module
Publication 1756-IN588A-EN-P - February 2004
Enable/Disable Other Services
You can enable other services from the Administrative Settings → Device
Configuration → Device Services page.
Select the services you want to use. Enable the:
• FTP (File Transfer Protocol) service to allow file transfers to and
from the web server module
• SNMP (Simple Network Management Protocol) service if your
system uses SNMP management software
• SMTP (Simple Mail Transfer Protocol) to service email
• CIP (Common Industrial Protocol) Bridge EtherNet/IP to Backplane
service to allow navigation and bridging to only the web server
module and not to any other device in the chassis
• CIP (Common Industrial Protocol) Bridge Backplane to EtherNet/IP
service to allow navigation and bridging to the web server module and
to any other device in the chassis
• XML/ASP (Extended Markup Language/Active Server Page) service
to allow web access to the module
For more information, see the EtherNet/IP Web Server Module User Manual,
publication ENET-UM527.