Rockwell Automation 1738-IB4DM12 ArmorPoint 24V dc 4-channel Digital Input Module with Diagnostics I.I. - Manual (Page 4)

Publication 1738-IN021A-EN-E - January 2007
4 ArmorPoint 24V dc 4-channel Digital Input Module with Diagnostics
Mount the I/O Base To mount the base on a wall or panel, use the screw holes provided in the base.
A drilling dimensions mounting illustration for the base with an adapter is
shown below.
Install the mounting base as follows:
1. Lay out the required points as shown in the drilling dimension drawing.
2. Drill the necessary holes for #8 (M4) machine or self-tapping screws.
3. Mount the base using #8 (M4) screws.
4. Ground the system using the ground lug connection. (The ground lug
connection is also a mounting hole.)
IMPORTANT
The module must be mounted on a grounded metal mounting
plate or other conductive surface.
43769
4.02 in.
102 mm
1.81 in.
46 mm
Adapter
1.9 in.
47.2 mm
2.0 in.
50 mm
0.87 in.
22 mm
2.0 in.
50 mm
0.87 in.
22 mm
2.0 in.
50 mm
Drilling Dimensions
Ground lug connection
Latching mechanism
Mounting base
43675