Rockwell Automation 1738-IB4DM12 ArmorPoint 24V dc 4-channel Digital Input Module with Diagnostics I.I. - Manual (Page 5)

Publication 1738-IN021A-EN-E - January 2007
ArmorPoint 24V dc 4-channel Digital Input Module with Diagnostics 5
Install the Digital
Input Module
To install the digital input module:
1. Using a bladed screwdriver, rotate the keyswitch on the mounting base
clockwise until the number 1 aligns with the notch in the base.
2. Position the module vertically above the mounting base. The module
will bridge two bases.
3. Push the module down until it engages the latching mechanism. You will
hear a clicking sound when the module is properly engaged.
The locking mechanism will lock the module to the base.
Remove the Module From the Mounting Base
To remove the module from the mounting base:
1. Put a flat blade screwdriver into the slot of the orange latching
mechanism.
2. Push the screwdriver toward the module to disengage the latch.
The module will lift up off the base.
3. Pull the module off of the base.
0
1
2
3
MOD
NET
1738-IB4DM12
24V dc In with
Diagnostics
0 1
2 3
IO Diagnostics:
Solid Red = Short
Flashing Red = Open
Module will bridge two bases.
43772