Wiring considerations – Rockwell Automation 1746-XXXX SLC 500 4-Channel Analog I/O Modules Installation Instructions User Manual
Page 12
Advertising
12 SLC™ 500 4-Channel Analog I/O Modules
Publication 1746-IN008C-EN-P - May 2004
Wiring Considerations
The following section provides system wiring guidelines, how to ground your
Belden™ cable, and how to determine the cable length.
ATTENTION
Before wiring any analog module, disconnect power from the
SLC 500 system and from any other source to the analog
module.
Top and Bottom Module
Release (s)
Card Guide
@JO$&/QQE
@JO$&/QQE
".
".
Advertising