Rockwell Automation 1734-AENT Point I/O Ethernet Adapter Installation Instructions - Manual (Page 17)

POINT I/O EtherNet/IP Adapter 17
Publication 1734-IN590B-EN-P - February 2005
Module Location Starter module - left side of the 1734 system
Power Supply Specifications
Input Voltage Rating 24V dc nominal
10-28.8V dc range
Field Side Power
Requirements 24V dc (+20% = 28.8V dc maximum) @ 400mA maximum
Inrush Current 6A maximum for 10ms
Interruption Output voltage will stay within specifications when input drops out
for 10ms at 10V with maximum load.
General Specifications
Indicators 4 red/green status indicators
Adapter status
PointBus status
Network activity status
Network status
2 green power supply status indicators:
System Power (PointBus 5V power)
Field Power (24V from field supply)
Power Consumption 4.5W maximum @ 28.8V dc
Power Dissipation 15.5W maximum @ 28.8V
PointBus Output
Current 1A maximum @ 5V dc ±5% (4.75 - 5.25)
Input Overvoltage
Protection Reverse polarity protected
Thermal Dissipation 9.5 BTU/hr maximum @ 28.8V dc
Isolation Voltage Tested to withstand 1800V dc for 60s
Field Power Bus
Nominal Voltage
Supply Voltage Range
Supply Current 24V dc
10-28.8V dc range
10A maximum
Dimensions Inches
(Millimeters) 3.0H x 2.16W x 5.25L
(76.2H x 54.9W x 133.4L)