Rockwell Automation 1756-ENET/B ControlLogix EtherNet Comm. Interface Module, Series B Installation Instructions User Manual
Installation instructions, Catalog number 1756-enet/b
Advertising
Publication
1756-IN053D-EN-P - June 2002
Installation Instructions
ControlLogix Ethernet Communication
Interface Module
Catalog Number 1756-ENET/B
Use this manual as a guide to install the ControlLogix™ Ethernet™
Communication Interface Module. This table identifies what this
manual contains and where to find specific information.
Topic
Page
Preparing the Chassis for Module Installation
Determining Module Slot Location
Installing the Module in the Chassis
Removing or Replacing the Module (when applicable)
Installing or Removing the Module While Power Is Applied
Connecting the Module to the Ethernet Network
Checking Power Supply and Module Status
Where to Find Information on Configuring the Ethernet Module
Advertising
Table of contents
Document Outline
- 1756-IN053D-EN-P, ControlLogix Ethernet Communication Interface Module Installation Instructions
- Important User Information
- European Zone 2 Certification
- Identifying Module Components
- Preparing the Chassis for Module Installation
- Determining Module Slot Location
- Installing the Module in the Chassis
- Removing or Replacing the Module (when applicable)
- Wiring the Ethernet Connector
- Connecting the Module to the Ethernet Network
- Applying Chassis Power
- Checking Power Supply and Module Status
- Troubleshooting the Module
- Where to Find Information on Configuring the Ethernet Module
- Hazardous Location Information
- Specifications
- Back Cover