Rockwell Automation 1756-ENET/B ControlLogix EtherNet Comm. Interface Module, Series B Installation Instructions - Manual (Page 8)

8 ControlLogix Ethernet Communication Interface Module
Publication 1756-IN053D-EN-P - June 2002
Installing the Module in the Chassis
Align the circuit board with top and
bottom guides in the chassis.
1
Slide the module into the chassis. Make
sure the module backplane connector
properly connects to the chassis backplane.
2
The module is properly installed
when it is flush with the power
supply or other installed modules.
Circuit Board
3