Rockwell Automation 1756-ENET/B ControlLogix EtherNet Comm. Interface Module, Series B Installation Instructions - Manual (Page 7)

ControlLogix Ethernet Communication Interface Module 7
Publication 1756-IN053D-EN-P - June 2002
For information about installing these products, refer to the
publications listed in this table.
Determining Module Slot Location
You can install the module in any slot in the ControlLogix chassis.
You can also install multiple ENET modules in the same chassis. The
figure below shows chassis slot numbering in a 4-slot chassis. Slot 0 is
the first slot and is always the leftmost slot in the rack (the first slot to
the right of the power supply).
Chassis
Type
Chassis
Installation
Power
Supply
Power Supply
Installation
Series B: 1756-A4, -A7, -A10,
-A13, -A17 Pub. No.
1756-IN080
1756-PA72/B Pub. No.
1756-5.67
1756-PB72/B
1756-PA75/A Pub. No.
1756-5.78
1756-PB75/A
Power Supply
Slot 0
Slot 1
Slot 2
Slot 3
Chassis