Rockwell Automation 1756-ENET/B ControlLogix EtherNet Comm. Interface Module, Series B Installation Instructions - Manual (Page 12)

12 ControlLogix Ethernet Communication Interface Module
Publication 1756-IN053D-EN-P - June 2002
If your application requires the module door to be closed, use one of
these custom AUI connector cables available in two lengths:
•
2 meters (catalog number 1756-TC02), or
•
15 meters (catalog number 1756-TC15).
Applying Chassis Power
IMPORTANT
Connecting the module to the network via an
Ethernet switch will reduce collisions and lost
packets and increase network bandwidth. See the
EtherNet/IP Performance and Application Guide,
publication ENET-AP001, for more information.
20921-M
ON
POWER
OFF
ON
POWER OFF