Rockwell Automation 1791D-N4CV2X CompactBlock I/O for DeviceNet Expansion Module I.I. User Manual
Page 5
Advertising
CompactBlock I/O Analog Combination Input/Output Expansion Module 5
Publication
1791D-IN002A-EN-P - June 2003
Module Mounting
You can install the CompactBlock module on a panel or DIN rail.
Panel Mounting
1.
Place the module against the panel where you want to mount it.
2.
Drill holes in the panel that are aligned with mounting holes on the
module.
3.
Place screws through each of the 2 mounting holes and tighten the
screws until the module is firmly in place.
!
WARNING
When used in a Class I, Division 2, hazardous location,
this equipment must be mounted in a suitable
enclosure with proper wiring method that complies
with the governing electrical codes.
Base Module
141 mm
5.55 in
41 mm
1.6 in
41673
Advertising