Rockwell Automation 1747-L5xx SLC 5/03, 5/04, and 5/05 Modular Processors - Manual (Page 7)

SLC 5/03, SLC 5/04, and SLC 5/05 Modular Processors 7
Publication 1747-IN009B-EN-P - March 2008
Required Tools and Equipment
•
medium blade screwdriver
•
programming equipment
•
appropriate network interface or cable
Install the SLC Processor
Make sure system power is off; then insert the processor into slot 0 of the 1746
chassis.
Cable Requirements
Network Interface Processor
SLC 5/03 SLC 5/04 SLC 5/05
1747-UIC
X
(1)
(1)
requires 1747-C13 or 1747-CP3 cable
X
(4)
(4)
requires 1747-CP3 cable
X
(4)
1747-PIC X
1747-CP3 X X X
1784-PKTX(D)
X
(2)
(2)
requires 1784-CP14 cable
X
1784-PCMK
X
(3)
(3)
requires 1784-PCM4 cable
X
(5)
(5)
requires 1784-PCM6 cable
10/100Base-T Ethernet X
IMPORTANT
The SLC 500 modular processors must be inserted into the left slot (slot 0).
Inserting the processor in another slot won’t allow the processor to operate.
In addition, remove the protective wrap after installing the processor. Failure to
remove the wrap can cause the power supply to overheat.