Apply power to the processor – Rockwell Automation 1747-L5xx SLC 5/03, 5/04, and 5/05 Modular Processors User Manual
Page 8
Advertising
8 SLC 5/03, SLC 5/04, and SLC 5/05 Modular Processors
Publication 1747-IN009B-EN-P - March 2008
Apply Power to the Processor
1. Energize the chassis power supply.
2. Check the chassis power supply and processor LED indicators. The power
LED indicator on the power supply should be on and the fault LED indicator
on the processor should be flashing.
See the figure on page 9 for location of the power supply and processor LED
indicators.
Power
Supply
Protective Wrap
Card Guide
Processor Release
Advertising