Rockwell Automation 1734-OE2V/C Point I/O 2-Current and 2-Voltage Output Analog Modules - Manual (Page 20)

20 POINT I/O 2 Current Output and 2 Voltage Output Analog Modules
Publication 1734-IN002C-EN-E - April 2005
Specifications
Output Specifications 1734-OE2C 1734-OE2V
Number of Outputs 2 single-ended, non-isolated
Resolution 13 bits - over 0-21mA
2.5
µA/cnt (average value -
typical range:
2.3...2.7
µA/cnt)
14 bits
(13 plus sign)
1.28mV/cnt in unipolar or
bipolar mode
Output Current 0mA output until
communication
established
4-20mA user configurable
0-20mA user configurable -
Output Voltage - 0V output until
communication
established
0-10V (user configurable)
(-0.0V under, +0.5V over)
+10V user configurable
(-0.5V under, +0.5V over)
Absolute Accuracy 1 Current Output
0.1% Full Scale @ 25
o C
Voltage Output
0.1% Full Scale @ 25
o C
Accuracy Drift w/Temp.
30ppm/ o C 5ppm/ o C
Step Response to 63% of FS 24
µs
Current Load on
Voltage Output - 3mA
Resistive Load on
Current Output 0...750
Ω
-
Conversion Type Digital to analog converter
Conversion Rate 16
µs
20
µs
Data Format Signed Integer
Calibration Factory Calibrated