Rockwell Automation 1734-OE2V/C Point I/O 2-Current and 2-Voltage Output Analog Modules - Manual (Page 21)

POINT I/O 2 Current Output and 2 Voltage Output Analog Modules 21
Publication 1734-IN002C-EN-E - April 2005
General Specifications 1734-OE2C 1734-OE2V
Module Location 1734-TB, 1734-TBS, 1734-TB3, 17340TB3S
wiring base assembly
POINTBus Current 75 mA @5V dc
Power Dissipation -
Maximum at 28.8V 750
Ω load on each output
- 1.23 W
0Ω load on each output
- 1.83 W
1.0W
Thermal Dissipation -
Maximum at 28.8V 750
Ω load on each output
- 4.19 BTU/hr
0Ω load on each output
- 6.24 BTU/hr
3.4BTU/hr
Isolation Voltage
(Continuous-voltage
Withstand Rating) 50V Continuous
Tested to withstand 2200V dc for 60 s
No isolation between individual channels
External dc power
Supply Voltage
Voltage Range
Supply Current
24V dc nominal
10...28.8V dc
70 mA @ 24V dc (including
outputs @20 mA) 24V dc nominal
10...28.8V dc
35 mA @ 24V dc (including
outputs @3 mA)
Indicators 1 green/red module status indicator, logic side
1 green/red network status indicator, logic side
2 green/red output status indicators, logic side
Keyswitch Position 4
Dimensions H x W x L
56 x 12 x 75.5 mm (2.21 x 0.47 x 2.97 in)