Rockwell Automation 1734-OE2V/C Point I/O 2-Current and 2-Voltage Output Analog Modules - Manual (Page 24)

Publication 1734-IN002C-EN-E - April 2005 PN 957955-48
Supersedes Publication 1734-IN002B-EN-P - April 2002 and
1734-IN054E-EN-P - September 2003 Copyright © 2005 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Certification
3
(When Product is Marked)
1734-OE2C 1734-OE2V
c-UL-us UL Listed Industrial Control Equipment,
certified for U.S. and Canada
c-UL-us UL Listed for Class I, Division 2 Group A,B,C,D
Hazardous Locations, certified for U.S. and Canada
CE European Union 89/336/EEC EMC Directive,
compliant with:
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab., Industrial
Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
C-Tick Australian Radiocommunications Act,
compliant with:
AS/NZS CISPR 11, Industrial Emissions
EE
X European Union 94/9/EC ATEX Directive,
compliant with:
EN 50021; Potentially Explosive Atmospheres,
Protection “n” (Zone 2)
X
X
X
X
X
X
X
X
X
1. Includes offset, gain, non-linearity and repeatability error terms.
2. Use this Category information for planning routing. Refer to Industrial Automation Wiring
and Grounding Guidelines, publication 1770-4.1.
3. See the Product Certification link at www.ab.com for Declarations of Conformity,
Certificates, and other certification details.
POINT I/O, POINTBus, and RSLogix 5000 are trademarks of Rockwell Automation.
ControlNet is a trademark of ControlNet International, Ltd.
DeviceNet is a trademark of Open DeviceNet Vendor Association.