Rockwell Automation 1771-OBD Series C INSTL INSTR DC(10-60V) OUTPUT - Manual (Page 8)

8 dc (10…60V) Output Module
Publication 1771-IN054C-EN-P - November 2006
Connection Diagram
You must supply dc at terminals A through D on the wiring arm. You need four dc
connections to accommodate the total required surge rating on the module without
overstressing any single connection on the field wiring arm. Jumper all dc connections
together to prevent module damage. Connect terminal E to dc common.
User
dc Supply
dc Output
Device
Sourcing Configuration
Actual wiring runs in this direction.
The output device is
sinking current from
the module.
See applicable codes and laws.
+dc
+dc
+dc
+dc
Output 00
Output 01
Output 02
Output 03
Output 04
Output 05
Output 06
Output 07
Output 10
Output 11
Output 12
Output 13
Output 14
Output 15
Output 16
Output 17
-dc
A
B
C
D
00
01
02
03
04
06
07
10
11
12
13
14
15
16
17
E
05
+
_
+
_
11915