Rockwell Automation 1771-OBD Series C INSTL INSTR DC(10-60V) OUTPUT - Manual (Page 9)

dc (10…60V) Output Module 9
Publication 1771-IN054C-EN-P - November 2006
Refer to Driving an Input with an Output Module on page for direct connection to a
1771-ICD input module.
ATTENTION
Observe proper polarity, as indicated in the connection diagram on page 10 with dc
power connections. Reverse polarity, or application of ac voltage, could damage the
module.
IMPORTANT
You can use a dc (10…60V) output module (771-OBD series C) to directly drive
terminals on the following modules:
• dc (5…30V) input module (1771-IQ)
• dc (10…30V) input module (1771-IBD, 1771-IBN)
• dc (20…60V) input module (1771-ICD)
• dc (12…24V) input module (1771-IB)
• dc (24V) input module (1771-IQ16)
• dc (48V) input module (1771-IC)
IMPORTANT
Use the same dc supply to power both modules to make sure that ground is at the same
potential.