Rockwell Automation 1785 User Mnl. PLC-5 Prog.Control Flash - Manual

For A-B Internal Use Only
Publication 1785-6.2 March 1998
User Manual
PLC-5 Programmable Controller
Flash Tool
(Catalog Number 1785-L11B, -L20B, -L20C, -L20C15,
-L20E, -L26B, -L30B, -L40B, -L40C, -L40C15, -L40E, -L40L,
-L46B, -L46C15, -L60B, -L60C, -L60C15, -L60L, -L80B,
-L80C, -L80C15, -L80E, -L86B)
Use This Manual If... Use this manual if you are responsible for performing a flash
firmware upgrade to a flash-based PLC-5
®
processor.
This Manual Describes... This manual describes how to use the PLC-5 programmable
controller flash tool to upgrade these products:
• series E and later Enhanced PLC-5 processors
• series E and later Ethernet
®
PLC-5 processors
• series C and later ControlNet ™ PLC-5 processors
This manual also describes what to do if the flash upgrade does not
complete successfully.
The following publications contain additional information about
Allen-Bradley PLC-5 processor products. To obtain copies, contact
your local Allen-Bradley office or distributor.
For more information about: Read this publication: Publication number:
Enhanced PLC-5 processors Enhanced and Ethernet PLC-5 Programmable
Controllers User Manual 1785-6.5.12
Ethernet PLC-5 processors
ControlNet 1.0 or 1.25 PLC-5 processors ControlNet PLC-5 Programmable Controllers
User Manual 1785-6.5.14
ControlNet 1.5 PLC-5 processors ControlNet PLC-5 Programmable Controllers
Phase 1.5 User Manual 1785-6.5.22