Step 7 - uninstalling the flash tool, Back cover, Delete all files within that directory by typing – Rockwell Automation 1785 User Mnl. PLC-5 Prog.Control Flash User Manual
Page 10: Change to the root directory by typing, Remove the flash directory by typing
Publication 1785-6.2 March 1998
Supersedes Publication 1785-6.2 June 1997
Publication 1785-6.2-RN2 July 1997
955131-61
1998 Rockwell International. All Rights Reserved. Printed in USA
10
Step 7 - Uninstalling the Flash Tool
We recommend that you remove the flash tool directory and all of the files it
contains. Follow these steps to uninstall the flash tool.
Important: Make sure you are in the flash directory that you created on the
hard drive so that you do not accidentally delete the wrong files.
1. On the programming terminal, change to the directory containing the
firmware files by typing:
c:
cd \flash
2. Delete all files within that directory by typing:
del *.*
3. Change to the root directory by typing:
cd\
4. Remove the flash directory by typing:
rd flash
PLC-5 and ControlNet are trademarks of Allen-Bradley, Inc. a Rockwell International Company
Ethernet is a registered trademark of DEC, Intel, and Xerox Corporation.
Windows, Windows 95, and Windows NT are registered trademarks of Microsoft in the U.S. and other countries.
Return
Return
Return
Return
Return