Rockwell Automation 1769-IF16C Conpact High Density Analog Current Input Module - Manual (Page 3)

Compact High-density Analog Current Input Module 3
Publication 1769-IN085A-EN-P - August 2008
Electrostatic Discharge
Remove Power
ATTENTION
Electrostatic discharge can damage integrated circuits or
semiconductors if you touch bus connector pins. Follow these
guidelines when you handle the module:
•
Touch a grounded object to discharge static potential.
•
Wear an approved wrist-strap grounding device.
•
Do not touch the bus connector or connector pins.
•
Do not touch circuit components inside the module.
•
Use a static-safe work station, if available.
•
Keep the module in its static-shield box when not in use.
ATTENTION
Remove power before removing or inserting this module. When you
remove or insert a module with power applied, an electrical arc may
occur. An electrical arc can cause personal injury or property damage
by:
•
sending an erroneous signal to your system’s field devices, causing
unintended machine motion.
•
causing an explosion in a hazardous environment.
Electrical arcing causes excessive wear to contacts on both the module
and its mating connector. Worn contacts may create electrical
resistance.