Rockwell Automation 1792D-4BVT4D ArmorBlock MaXum 4 Input/4 Output Module Series B - Manual (Page 4)

4 ArmorBlock MaXum 4 Input / 4 Output Module Series B
Publication 1792D-IN012B-EN-P - September 2000
See the illustration of the node address setting below.
The module is equipped with AutoBaud detect. AutoBaud lets the
module read the settings already in use on your DeviceNet network
and automatically adjusts to follow those settings.
Install the Module
This module mounts to the following cable bases:
• 1792D-CBFM for KwikLink™ flat media installation
• 1792D-CB12 for 12mm drop cable installation
• 1792D-CB18P for round media DeviceNet and output power
• 1792D-CB18PT for 4 connector blocks needing round media
DeviceNet and output power
• or other optional cable base assembly
IMPORTANT
The cable base should already be installed. See
publication 1792D-IN009B-EN-P for more
information on installing the cable base.
Example: Node Address is set at 62, see small black dots.
30703-M