Rockwell Automation 1785-Lx0C15 ControlNet PLC-5 Programmable Controllers User Manual - Manual (Page 3)

1785-UM022C-EN-P - February 2008
Summary of Changes
The information below summarizes the changes to the ControlNet
PLC-5 Programmable Controllers User Manual.
To help you find new and updated information, look for the revision
bars as shown to the left of this paragraph.
Revised Information See the table in the Using the ControlNet PLC-5 Processor in a
ControlNet I/O System section on page 2-31 to see the revision to
information about the ControlLogix ControlNet Bridge.
Software and Hardware
Requirements Use the following table to understand specific features that are only
available with specific versions and releases of software and PLC-5
processors:
If you want this feature:
You need both of these
versions of software:
And this PLC-5 processor
(ControlNet Series F,
Revision A or later)
RSLogix 5 RSNetWorx:
Standard functionality 2.2 or later 1.8 or later all
Hot Backup (1771 and FLEX I/O) 3.21 or later 1.8 or later PLC-5/40 or -5/80
Multicast Outputs 3.21 or later 3.0 or later PLC-5/20, -5/40 or -5/80
SLC I/O (also with Hot Backup) 5.0 or later 3.0 or later PLC-5/40 or -5/80