Rockwell Automation 1788-ENBT EtherNet/IP Daughtercard Installation Instructions User Manual
Ethernet/ip daughtercard, Installation instructions, Catalog number 1788-enbt
                                    Advertising
                                    
                                        
                                    
                                
                                 
Publication 1788-IN054A-EN-P - September 2002
Installation Instructions
EtherNet/IP Daughtercard
Catalog Number 1788-ENBT
Use this document as a guide to install the EtherNet/IP daughtercard. This 
document covers only the hardware installation; refer to the FlexLogix System User 
Manual, publication 1794-UM001, for information about configuring the 
daughtercard.
This table lists the contents of the document and where to find specific information.
For information about
See page
About the EtherNet/IP Daughtercard
Identifying Daughtercard Components
Connect the Daughtercard to the Network
Daughtercard System Performance
Interpret the LED Status Indicators
Where to Find Information on Configuring the Daughtercard
                                    Advertising
                    
                        
                    
                            
            
                            
                        Table of contents
                        
                            
                    
                Document Outline
- EtherNet/IP Daughtercard
- Important User Information
- About the EtherNet/IP Daughtercard
- Required Software
- Related Publications
- Identifying Daughtercard Components
- Install the Daughtercard
- Connect the Daughtercard to the Network
- Apply Host Power
- Daughtercard System Performance
- Interpret the LED Status Indicators
- Where to Find Information on Configuring the Daughtercard
- Hazardous Location Information
- Specifications