Rockwell Automation 1788-ENBT EtherNet/IP Daughtercard Installation Instructions - Manual (Page 2)

2 EtherNet/IP Daughtercard
Publication 1788-IN054A-EN-P - September 2002
Important User Information
Because of the variety of uses for the products described in this publication, those
responsible for the application and use of these products must satisfy themselves that all
necessary steps have been taken to assure that each application and use meets all
performance and safety requirements, including any applicable laws, regulations, codes
and standards. In no event will Rockwell Automation, Inc. be responsible or liable for
indirect or consequential damage resulting from the use or application of these
products.
Any illustrations, charts, sample programs, and layout examples shown in this
publication are intended solely for purposes of example. Since there are many variables
and requirements associated with any particular installation, Rockwell Automation does
not assume responsibility or liability (to include intellectual property liability) for actual
use based upon the examples shown in this publication.
Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation and
Maintenance of Solid-State Control (available from your local Rockwell Automation
office), describes some important differences between solid-state equipment and
electromechanical devices that should be taken into consideration when applying
products such as those described in this publication.
Reproduction of the contents of this copyrighted publication, in whole or part, without
written permission of Rockwell Automation, is prohibited.
Throughout this publication, notes may be used to make you aware of safety
considerations. The following annotations and their accompanying statements help you
to identify a potential hazard, avoid a potential hazard, and recognize the consequences
of a potential hazard
:
WARNING
!
Identifies information about practices or circumstances that can
cause an explosion in a hazardous environment, which may lead
to personal injury or death, property damage, or economic loss.
ATTENTION
!
Identifies information about practices or circumstances that can
lead to personal injury or death, property damage, or economic
loss.
IMPORTANT
Identifies information that is critical for successful application and
understanding of the product.